Shop By Vehicle
Year
Make
Model
Body
Engine

NEUSPEED Power Module 64.10.14

NEUSPEED Power Module 64.10.14
Part Number: 64.10.14
Brand: Neuspeed
Price: $375.00

This product qualifies for Free Ground Shipping*
Qty

NEUSPEED Power Module is a device which easily allows most able person to upgrade the performance of their VAG 1.8 TSI and 2.0 TSI (Gen 2.5 or Gen3 engine) without reducing the reliability or integrity of the engine, clutch and driveline. This is the simplest and best alternative or option to chip tuning. The NEUSPEED Power Module is an all new design, not some rebranded 3rd party product. It is a plug and play box that intercepts at the MAP and Boost sensors and can be installed or removed within minutes without any detection. There is a convenient two position switch for 91+ premium fuel and 100+ octane race fuel for maximum HP output. The electrical components are housed in a billet aluminum enclosure which is protected from the elements and is designed and manufactured to be positioned within the engine bay of your vehicle. The wire harness is manufactured using automotive quality wiring which is both oil and heat resistant, and has the same OE water proof connectors as used on your engine.

NEUSPEED Power Module's are designed, engineered and tuned for a specific engine, not a generic box.

Features:

Two position switch:

  • 91+ Premium Fuel / 4 PSI Increase
  • 100+ Octane Fuel / 6 PSI Increase

Power / Torque Gain:

  • 1.8 TSI: 35+ HP /  35+ ft./lbs.Torque
  • 2.0 TSI: 40+ HP /  40+ ft/lbs.Torque

Increases boost by modifying the charge pressure and map sensor readings

  • Allows ECU to remain in control of boost
  • The actual boost is increased by a precise amount
  • Boost is increased in a gradual, progressive fashion
  • Uses the closed loop control of the ECU to increase boost

       Readings in the vacuum region are stock

  • No effect on cold start
  • No effect on warm-up
  • No change to idle, cruise and moderate acceleration modes of operation

Retains stock ECU programming

  • No change to factory ECU programming, communication or safety protocols
  • No ECU TD1 code to void manufactures warranty
  • Not effected by ECU reprogramming by the dealer
  • Makes use of existing ECU programming for higher boost levels
  • Correct Air/Fuel mixture maintained from the wide band O2 and closed loop mode of the ECU
  • Ignition timing optimized by the ECU

Easy Installation

  • Plug-and-play intercept at Boost and MAP sensor connector locations
  • Installation or removal can be completed in a few minutes (depending on model)
  • No trace Power Module was ever there after removal
  • Power Module can be sold or transfered to another vehicle of the same engine type.

 

 

Notes:

Fits: 2013.5-15 VW Jetta GLI & Turbo Beetle 2.0 TSI 210HP and 2014-15 Beetle, Jetta & Passat with 1.8 TSI engines.

IN DEVELOPMENT: MKV & VI 2.0 TSI WITH MAF SENSOR. AVAILABLE APRIL/MAY.

CARB Pending. Emission testing to be California compliant and any states that follow.

Designed and Engineered Camarillo, California. Made in USA

NOTE: When increasing turbo boost on the 1.8 TSI or 2.0 TSI engines the P-Flo Intake and Hi-Flo Discharge Pipe are recommended.

DO NOT USE POWER MODULE IF ECU HAS BEEN TUNED OR MODIFIED.

Scroll to view product options.

Part # Description Price
64.10.14 NEUSPEED Power Module 64.10.14 $375.00 Add to Cart

Scroll to view product options.

Fits These Applications:

Year Make Model SubModel Engine Transmission Drive
2014 - 2017 Volkswagen Jetta MK6 1.8 TSI
2014 - 2015 Volkswagen PASSAT (B7) 1.8 TSI
2013 - 2018 Volkswagen Jetta GLI MK6 2.0 TSI - 210HP